Microconnect UTP6002W Καλώδιο δικτύου λευκό 0,2 m Cat6 U/UTP (UTP)

The MicroConnect UTP6002W is a 0.2 m Cat6 U/UTP networking cable with RJ-45 connectors on both ends. Designed for reliable wired connections between devices such as switches, routers, modems or wall outlets and patch panels, this white cable supports Cat6 testing up to 250 MHz and is backward compatible with Cat5e and Cat5 standards. It provides a compact, short-length option for connecting nearby equipment and supports data rates up to 10000 Mbit/s.

Advantages

This Cat6 cable features U/UTP construction and latch protection on the RJ-45 plugs to reduce the risk of connector damage during installation in tight spaces. Its short 0.2 m length minimises cable clutter and signal degradation for close-proximity connections while maintaining Cat6 performance up to 250 MHz. Backward compatibility with Cat5e and Cat5 ensures interoperability with existing network equipment.

Suitable for

• Connecting a switch to a patch panel at short distance
• Linking a router or modem to nearby network devices
• Short interconnections in small office or home entertainment setups

Key specifications

• Brand: MicroConnect
• Model: UTP6002W (MPN)
• EAN: 5711045967283
• Category: Network Cables
• Cable type: Cat6 U/UTP
• Connectors: RJ-45 to RJ-45
• Length: 0.2 m
• Test frequency: up to 250 MHz (Cat6 standard)
• Data rate: up to 10000 Mbit/s
• Colour: White
• Weight: 0.05 kg

How to use

Insert an RJ-45 connector into the corresponding port on each device (for example, switch to patch panel or router to modem). Ensure the latch clicks to secure the connection and route the cable to avoid sharp bends or mechanical stress. For wall outlets or keystone jacks, plug the cable into the jack until the latch secures the connector. Because the cable is only 0.2 m long, confirm both endpoints are within close proximity before installation.

Recommendations

Use this short Cat6 cable for direct, short-distance links where minimal cable length and tidy installation are priorities. Avoid excessive bending or pulling on the connectors; maintain connections within the Cat6 test frequency and environmental conditions specified by your networking equipment.