Microconnect SFTP710G Καλώδιο δικτύου πράσινο 10 m Cat7 S/FTP (S-STP)

The MicroConnect SFTP710G RJ-45 Cat7 10 m in green is a shielded Ethernet patch cable designed for reliable, high-speed wired connections between network devices such as switches, modems and routers, and to structured cabling via patch panels, keystone jacks or wall outlets. The cable follows Cat7 specifications (tested to 600 MHz) and is fitted with RJ-45 connectors compatible with Cat6a and earlier standards, making it suitable for office, home and entertainment networking applications.

Advantages

SFTP shielding reduces electromagnetic interference (EMI) and limits crosstalk, supporting stable data transmission and lower error rates. The cable is backwards compatible with Cat6a, Cat6, Cat5e and Cat5 equipment thanks to its RJ-45 terminations. A reinforced strain relief (snagless boot) protects the connector tab during tight installations and helps prevent damage when routing the cable through confined spaces. The 10 m length and green outer jacket provide visibility and reach for typical desk-to-switch or patch-panel runs.

Suitable for

• Connecting switches, routers and modems to patch panels or wall outlets
• Home and small office wired networks
• High-speed internet and entertainment systems (smart TVs, media players)
• Environments requiring reduced EMI and improved signal integrity

Key specifications

• Standard: Cat7 (tested to 600 MHz)
• Shielding: S/FTP (overall shield + individually foil‑shielded pairs)
• Connectors: RJ-45 to RJ-45
• Length: 10 m
• Colour: Green
• Compatibility: Backwards compatible with Cat6a/Cat6/Cat5e/Cat5
• Weight: 0.03 kg

How to use

Connect one RJ-45 end of the MicroConnect SFTP710G to a network device (for example a router, modem or switch) and the other end to the target device or to a patch panel/keystone jack. Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid running it tightly alongside unshielded power cables to maintain performance. The snagless boot helps when pulling the cable through conduit or tight spaces.

Recommendations

For optimal performance, use the SFTP710G for links up to 10 m in structured cabling or device-to-device connections and pair it with shielded network equipment or properly grounded patch panels to make full use of the shielding. Avoid excessive bending radii and keep the cable away from strong EMI sources for best signal integrity.