Microconnect SFTP7075G Καλώδιο δικτύου πράσινο 7,5 m Cat7 S/FTP (S-STP)

The Microconnect SFTP7075G RJ-45 Cat7 7.5 m Green is a shielded networking cable designed for reliable, high-speed connections between network devices such as switches, modems and routers, or between devices and structured cabling via patch panels, keystone jacks or wall outlets. Manufactured to the Cat7 standard and tested up to 600 MHz, the cable uses S/FTP shielding and RJ-45 terminations compatible with Cat6a and earlier standards, making it suitable for home and small office networks and entertainment setups.

Advantages

S/FTP shielding reduces electromagnetic interference (EMI) and crosstalk, helping to maintain signal integrity and lower error rates. The cable is tested up to 600 MHz according to the Cat7 standard while using Cat6a-compatible RJ-45 connectors for broad backward compatibility with Cat6a, Cat6, Cat5e and Cat5 devices. A molded snagless boot protects the connector latch during installation in tight spaces, and the green jacket provides clear visual identification in cabling runs.

Suitable for

• Connecting switches, routers or modems to patch panels or wall outlets
• Home and small office LANs
• High-bandwidth entertainment devices and media servers

Key specifications

• Cable standard: Cat7 (tested up to 600 MHz)
• Shielding: S/FTP (overall shield + individually shielded pairs)
• Connectors: RJ-45 – both ends
• Length: 7.5 m
• Colour: Green
• Backward compatibility: Cat6a, Cat6, Cat5e, Cat5
• Weight: 0.03 kg

How to use

Plug each RJ-45 connector into the appropriate network ports on devices or infrastructure points (switch, router, modem, patch panel or wall jack). Ensure connectors are fully inserted until the latch clicks and route the cable to avoid sharp bends or tight kinks that could affect performance. For permanent installations, secure the cable along cable management paths and avoid running it parallel to high-voltage power lines to reduce potential interference.

Recommendations

For optimal performance, use the Microconnect SFTP7075G in shielded or grounded installations where possible, and avoid excessive bending radii. If integrating with Cat6a equipment, confirm that connectors and ports are in good condition to preserve the cable’s rated performance.