Microconnect SFTP70025G καλώδιο δικτύου πράσινο 0,25 m Cat7 S/FTP (S-STP)

The MicroConnect SFTP70025G is a 0.25 m Cat7 networking cable with S/FTP shielding and RJ-45 connectors on both ends. Designed for short patching and device-to-device connections, the cable supports the Cat7 standard with testing up to 600 MHz while using Cat6a-compatible connectors, ensuring backward compatibility with Cat6a, Cat6, Cat5e and Cat5 installations. The cable is green and intended for home and small office network and entertainment applications.

Advantages

SFTP shielding reduces electromagnetic interference (EMI) and crosstalk, improving signal integrity and reducing transmission errors. The Cat7 specification provides higher frequency testing up to 600 MHz, while Cat6a-compatible RJ-45 connectors ensure compatibility with common network equipment. The short 0.25 m length is convenient for tidy patching between nearby devices, and a reinforced strain-relief boot helps protect the connector during installation in tight spaces.

Suitable for

• Connecting switch, modem or router to nearby devices or patch panels
• Short patching in home or small office networks
• Entertainment setups where short, shielded connections are needed

Key specifications

• Cable length: 0.25 m
• Standard: Cat7 (tested up to 600 MHz); connectors meet Cat6a minimum
• Shielding: S/FTP (overall foil + individually shielded pairs)
• Connectors: RJ-45 to RJ-45
• Colour: Green
• Weight: 0.02 kg
• Brand / MPN: MicroConnect / SFTP70025G
• EAN: 5712505454558

How to use

Plug one RJ-45 connector into the network device (switch, router or modem) and the other into the destination device, patch panel or keystone jack. Use the 0.25 m length for short connections where devices are adjacent or placed close to each other. Ensure connectors are fully inserted until the latch clicks and route the cable to avoid kinks or sharp bends that could stress the conductor or shielding.

Recommendations

For best performance, use this shielded Cat7 cable in environments with potential EMI (near power supplies or other electronic equipment) and keep cable runs short to match the product’s intended 0.25 m length. Avoid excessive bending and secure the cable with cable management to maintain connector strain relief.