Microconnect MC-UTP6A10S Καλώδιο δικτύου μαύρο 10 m Cat6a U/UTP (UTP)

The MicroConnect MC-UTP6A10S RJ-45 Cat6a 10 m Black is a 10‑metre network patch cable designed for high‑speed data transmission up to 10 Gbit/s and bandwidth up to 500 MHz. Constructed as U/UTP (unshielded twisted pair with overall screening) it reduces interference for stable connections and features gold‑plated RJ45 contacts for reliable conductivity and corrosion resistance. The cable includes reinforced 50µ" RJ45 connectors, latch protection to prevent clip breakage and a meter marking on the boot for easy length identification.

Advantages

The cable supports 10Gbit Ethernet and extended bandwidth up to 500 MHz, enabling high throughput and low signal loss. Gold‑plated RJ45 connectors offer improved conductivity and durability. Reinforced 50µ" contacts and a latch protector increase connector longevity, while the printed meter markings on the boot simplify installation and cable management. The black jacket provides a professional appearance suitable for structured cabling.

Suitable for

• 10 Gigabit Ethernet links in data centres and enterprise networks
• Server-to-switch and switch-to-switch patching
• High‑bandwidth workstations, NAS and multimedia streaming
• Structured cabling and patch panels in racks

Key specifications

• Length: 10 m
• Standard: Cat6a
• Maximum data rate: 10000 Mbit/s (10 Gbit/s)
• Bandwidth: up to 500 MHz
• Connectors: RJ‑45 to RJ‑45, gold‑plated
• Shielding: U/UTP (overall screening)
• Colour: Black
• Weight: 0.36 kg

How to use

Connect one RJ‑45 end to your network device (switch, router or NIC) and the other end to the corresponding port. Ensure both ends are fully inserted until the latch clicks to secure the connection. Route the cable neatly through cable management paths or trays and avoid tight bends or sharp edges to preserve signal integrity. Use the meter markings on the boot to confirm cable length when planning runs.

Recommendations

For optimal performance, avoid running the cable parallel to high‑voltage power lines and keep a distance from electromagnetic interference sources. Inspect connectors before use and replace the cable if the jacket or connectors are damaged. In rack installations use cable ties or Velcro straps to prevent strain at connector ends.