Microconnect MC-SFTP80025G Καλώδιο δικτύου πράσινο 0,25 m Cat8.1 S/FTP (S-STP)

The MicroConnect MC-SFTP80025G CAT8.1 patch cable is designed for high-performance networking where low latency and very high bandwidth are required. This 0.25 m S/FTP cable features RJ-45 connectors with 50µ" gold plating for improved contact, latch protection to reduce risk of clip damage, and meter marking on the boot for quick length identification. It supports data rates up to 40000 Mbit/s and bandwidth suitable for 25Gbps applications.

Advantages

Shielded S/FTP construction reduces electromagnetic interference and crosstalk in dense installations. CAT8.1 specification provides high bandwidth up to 2000 MHz, while gold-plated 50µ" RJ45 contacts improve signal transfer and corrosion resistance. Short 0.25 m length is useful for tidy patching in racks or between adjacent ports, and the colored jacket helps with visual cable management.

Suitable for

• Short-distance patching in server racks and network cabinets
• High-speed links requiring 25Gbps-capable cabling
• Environments needing reduced interference (S/FTP shielding)
• Applications where clear cable length identification is useful

Key specifications

• Standard: CAT8.1
• Length: 0.25 m
• Connectors: RJ-45 — RJ-45, 50µ" gold-plated contacts
• Shielding: S/FTP (overall foil with individually shielded pairs)
• Maximum data rate: up to 40000 Mbit/s
• Bandwidth: up to 2000 MHz
• Colour: Green
• Weight: 0.03 kg

How to use

Connect one RJ-45 connector to the network port on your switch, router, or network device and the other to the corresponding port on the connected device. Ensure the latch clicks into place to secure the connection. Use the short 0.25 m cable for direct patching between adjacent ports or for connections inside equipment racks to maintain tidy cable runs.

Recommendations

For optimal performance, avoid tight bends and excessive tension on the cable; maintain bend radii recommended for Cat8.1 cables. Use the green jacket for visual identification in multi-cable installations and replace the cable if connectors show physical wear or damage to the shielding.