Microconnect MC-SFTP6A05W Καλώδιο δικτύου λευκό 5 m Cat6a S/FTP (S-STP)

The MicroConnect MC-SFTP6A05W is a 5 m Cat6a networking cable with S/FTP shielding designed for stable high-speed data transmission up to 10 Gbit/s and bandwidth up to 500 MHz. The cable features gold-plated RJ-45 connectors and 50µ'' (50 micro-inch) plating on the contacts for reliable connectivity, latch protection to reduce the risk of clip breakage and meter markings on the boot for easy length identification. Its white jacket suits office and residential installations where a discreet appearance is preferred.

Advantages

S/FTP shielding reduces electromagnetic interference and crosstalk to maintain signal integrity at high data rates. Gold-plated RJ-45 contacts and 50µ'' plating improve conductivity and corrosion resistance for durable connections. Latch protection helps prevent accidental damage to the connector clip, while meter markings on the boot allow quick identification of the cable length during installation and maintenance.

Suitable for

• 10 Gbit/s Ethernet links in data centers and server rooms
• High-bandwidth workstations and networked multimedia devices
• Structured cabling in offices and homes requiring Cat6a performance
• Runs up to 5 metres between patch panels, switches and endpoints

Key specifications

• Standard: Cat6a (S/FTP)
• Data rate: up to 10000 Mbit/s (10 Gbit/s)
• Bandwidth: up to 500 MHz
• Length: 5 m
• Connectors: RJ-45 — gold-plated contacts, 50µ'' plating
• Colour: White
• Weight: 0.1 kg
• MPN: MC-SFTP6A05W
• EAN: 5704174257868

How to use

Connect one RJ-45 end to a compatible network device (switch, patch panel, network card) and the other end to the corresponding port on the remote device. Ensure connectors are fully inserted until the latch clicks. Use the meter marking on the boot to confirm the installed cable length. Avoid sharp bends and excessive pulling force; route the cable through appropriate cable management to maintain performance.

Recommendations

For best performance, keep cable runs within specified distances for Cat6a and avoid running parallel to high-voltage power lines. Use proper cable management and strain relief; for permanent in-wall installations, verify local building codes and consider using plenum-rated alternatives if required.