Microconnect MC-SFTP6A01W Καλώδιο δικτύου λευκό 1 m Cat6a S/FTP (S-STP)

The MicroConnect MC-SFTP6A01W is a 1 m Cat6a S/FTP network patch cable designed for demanding environments that require 10 Gbit/s throughput and up to 500 MHz bandwidth. The cable has gold-plated RJ-45 connectors, S/FTP (S‑STP) shielding to reduce electromagnetic interference, and a white outer jacket. Meter markings on the boot simplify length identification.

Advantages

The cable supports 10Gbit/s data rates and up to 500 MHz bandwidth while S/FTP shielding helps maintain signal integrity in electrically noisy environments. Gold-plated RJ-45 connectors improve contact reliability and corrosion resistance. Reinforced latch protection reduces the risk of clip breakage during repeated use.

Suitable for

• 10 Gigabit Ethernet connections
• Server rooms and data centers with moderate electromagnetic interference
• Patching between switches, routers and wall outlets in office networks
• Short cable runs where 1 m length is required

Key specifications

• Model: MicroConnect MC-SFTP6A01W
• Cable category: Cat6a (S/FTP)
• Data rate: up to 10000 Mbit/s (10Gbit/s)
• Bandwidth: up to 500 MHz
• Connectors: RJ-45 to RJ-45, gold-plated
• Length: 1 m
• Colour: White
• Weight: 0.04 kg
• MPN: MC-SFTP6A01W
• EAN: 5704174257820

How to use

Plug each gold-plated RJ-45 connector into the corresponding Ethernet ports on your devices (switch, router, network outlet or NIC). Ensure connectors click into place with the latch. For best performance, avoid sharp bends and keep the cable away from sources of strong electromagnetic interference. Use the meter markings on the boot to confirm the 1 m length when planning cable routing.

Recommendations

For sustained 10Gbit/s performance, use Cat6a S/FTP cabling for short interconnects in rack and patching applications and avoid running alongside high-voltage power lines. Inspect connector latches periodically and replace the cable if the shielding or connector integrity is compromised.