Microconnect FIB422002 Καλώδιο InfiniBand/οπτικών ινών 2 m LC SC μπλε

The MicroConnect FIB422002 is a 2 m OM3 multimode fibre optic patch cable with LC and SC connectors, designed for high-speed, full-duplex data transmission. The cable uses 50/125 µm OM3 bend-insensitive multimode fibre and an LSZH jacket, making it suitable for 10G/40G/100G Ethernet links and compatible with 10G SR, 10G LRM and SFP+ transceivers. The cable is blue and intended for network patching and equipment interconnection in data centers and enterprise installations.

Advantages

The OM3 50/125 µm multimode fibre provides lower attenuation when bent or twisted compared with traditional multimode fibre, improving installation flexibility and reducing signal loss in constrained routing paths. The LC-to-SC connector combination supports full-duplex connections and wide compatibility with common transceivers and switches. The LSZH jacket meets common safety standards and reduces hazardous smoke emission in confined spaces.

Suitable for

• 10G Ethernet connections using SR or LRM transceivers
• SFP+ transceiver links and short-reach multimode applications
• Patch panels, switches and optical equipment interconnects in data centers
• Indoor cabling where LSZH jacket is required

Key specifications

• Cable length: 2 m
• Fibre type: OM3 multimode, 50/125 µm
• Connectors: LC to SC (full duplex)
• Jacket: LSZH
• Colour: Blue
• Weight: 0.02 kg
• Brand / MPN: MicroConnect / FIB422002
• EAN: 5705965890134

How to use

Inspect connectors for dust or damage before use and clean with an appropriate fibre cleaning tool if necessary. Plug the LC connector into the LC port and the SC connector into the SC port on the corresponding devices, observing correct polarity for full-duplex links. Route the cable without sharp bends, keeping bend radius within manufacturer recommendations for OM3 multimode fibre. Secure the cable to prevent strain on the connectors and avoid tight bundles with active power cables.

Recommendations

Use this OM3 LC–SC patch cable for short- to medium-reach multimode connections (typically within the same room or between adjacent racks). For longer distances or single-mode requirements, choose an appropriate single-mode fibre cable. Always follow equipment manufacturer guidelines for transceiver compatibility and maximum supported reach.