Microconnect B-UTP610Y Καλώδιο δικτύου κίτρινο 10 m Cat6 U/UTP (UTP)

The Microconnect B-UTP610Y RJ-45 Cat6 10 m Yellow is a Cat6 U/UTP networking cable designed to connect network devices such as switches, modems and routers, or to link devices to infrastructure components like patch panels, keystone jacks and wall outlets. With a 10 m length, RJ-45 connectors on both ends and a yellow jacket, the cable supports data transfer rates up to 10000 Mbit/s and is tested to the Cat6 frequency of 250 MHz. It is backward compatible with Cat5e and Cat5 installations and includes latch protection to reduce connector damage during installation in confined spaces.

Advantages

The Microconnect Cat6 cable offers tested performance up to 250 MHz and supports gigabit and higher data rates, while U/UTP construction reduces external interference. Its RJ-45 connectors on both ends simplify device-to-device connections, and the integrated latch protection helps prevent connector breakage during routing and installation. The 10 m length provides flexibility for home and small office layouts, and the yellow colour makes the cable easy to identify within a bundle.

Suitable for

• Connecting switches, routers, modems and networked devices
• Home and small office Ethernet wiring
• Linking to patch panels, keystone jacks and wall outlets
• Entertainment systems and media streaming setups

Key specifications

• Product: Microconnect B-UTP610Y
• Standard: Cat6, tested to 250 MHz
• Shielding: U/UTP (unshielded twisted pair)
• Data rate: up to 10000 Mbit/s (supported by product data)
• Connectors: RJ-45 — both ends
• Length: 10 m
• Colour: Yellow
• Compatibility: Backward compatible with Cat5e and Cat5

How to use

Plug one RJ-45 connector into the network port of a device (for example a router, switch or modem) and the other RJ-45 connector into the corresponding port on the other device or into a patch panel, keystone jack or wall outlet. Route the cable to avoid tight bends and sharp edges; the built-in latch protection reduces the risk of connector damage when pulling the cable through confined spaces. Verify link status on connected devices and test network speed if needed.

Recommendations

For optimal performance, avoid running the Cat6 cable parallel to high-voltage power lines and keep separation from large electrical equipment. Use cable management (clips, ties, trays) to prevent excessive bending and strain; in structured installations terminate the cable into appropriate patch panels or keystone jacks to maintain connector protection and ease maintenance.