Microconnect B-UTP610P Καλώδιο δικτύου μωβ 10 m Cat6 U/UTP (UTP)

The Microconnect B-UTP610P RJ-45 Cat6 10 m Purple is a Category 6 patch cable for connecting network devices such as switches, modems or routers to each other or to infrastructure elements like patch panels, keystone jacks and wall outlets. The cable supports data rates up to 10000 Mbit/s, is manufactured to Cat6 standard and tested to 250 MHz. U/UTP construction reduces interference, and the purple jacket makes cable identification easier in home and office networks.

Advantages

This Cat6 networking cable provides backward compatibility with Cat5e and Cat5 equipment while supporting higher bandwidth up to the Cat6 specification. It features standard RJ-45 connectors on both ends and includes latch protection to reduce the risk of connector damage during installation in tight spaces. The 10 m length offers flexibility for typical small office and home setups.

Suitable for

• Connecting switches, routers and modems to the network infrastructure
• Wiring between patch panels and wall outlets
• Home networks and small office network installations
• Entertainment systems and high-speed data links

Key specifications

• Cable type: U/UTP Cat6
• Length: 10 m
• Connectors: RJ-45 to RJ-45
• Test frequency: up to 250 MHz (Cat6 standard)
• Rated speed: up to 10000 Mbit/s
• Color: Purple
• Weight: 0.162 kg
• MPN: B-UTP610P
• EAN: 5711045352188

How to use

Plug each RJ-45 connector into the corresponding network ports on your devices or into patch panels and wall outlets. Ensure connectors click into place using the latch protection; do not force the plug at an angle. Route the cable avoiding sharp bends and excessive compression to maintain signal integrity and to meet the Cat6 performance specifications.

Recommendations

For best performance, keep cable runs under common maximum lengths for horizontal cabling and avoid running parallel to high-voltage power lines. When installing through tight conduits, use the latch protection carefully to avoid catching the connector; check terminations if you experience connectivity issues.