Microconnect B-UTP603SOUT Καλώδιο δικτύου Μαύρο 3 m Cat6 U/UTP (UTP)

MicroConnect B-UTP603SOUT is a 3 m Cat6 U/UTP outdoor patch cable designed for data connections in exterior environments. The cable supports Gigabit Ethernet speeds and is built with a double polyethylene outer jacket for improved resistance to water and UV exposure. It is tested to 250 MHz and is backward compatible with Cat5e and Cat5 installations. Connectors are equipped with strain relief and latch protection to reduce damage during installation in tight spaces.

Advantages

The double PE outer jacket provides enhanced protection against moisture and sunlight, while U/UTP construction maintains signal quality for high-speed networks. Gold-plated pins on the RJ-45 connectors improve contact reliability and corrosion resistance. Integrated strain relief and a latch protection mechanism prevent connector damage during routing and installation.

Suitable for

• Outdoor surveillance camera connections
• Facade and exterior building network runs
• Garden, camping or other outdoor network extensions
• Indoor-to-outdoor patching where weather resistance is required

Key specifications

• Category: Cat6 (U/UTP)
• Length: 3 m
• Bandwidth: tested to 250 MHz
• Maximum data rate: up to 10,000 Mbit/s (Gigabit-class performance)
• Connectors: RJ-45 to RJ-45 with gold-plated contacts
• Outer jacket: double PE (polyethylene), UV- and water-resistant
• Color: Black

How to use

Route the MicroConnect Cat6 cable between devices using the RJ-45 connectors to connect network equipment such as switches, cameras or routers. Ensure connectors are fully seated into RJ-45 ports until the latch clicks. When pulling the cable through conduits or tight spaces, use the integrated strain relief and avoid applying excessive force to the connector ends to prevent damage.

Recommendations

For outdoor installations, mount and secure the cable to prevent prolonged water pooling and avoid sharp bends. If the cable is exposed to direct mechanical stress or extreme conditions, inspect connector integrity periodically and replace the cable if insulation or connectors show signs of wear.