Microconnect B-UTP60025P Καλώδιο δικτύου βιολετί 0,25 m Cat6 U/UTP (UTP)

The Microconnect B-UTP60025P is a Cat6 networking patch cable with a length of 0.25 m and RJ-45 connectors on both ends. It supports data rates up to 10000 Mbit/s, is U/UTP constructed to reduce electromagnetic interference, and meets the Cat6 standard with testing up to 250 MHz. The cable is suitable for connecting switches, modems, routers, patch panels, keystone jacks or wall outlets in home and small office networks. It features latch protection to help prevent connector damage during installation in confined spaces.

Advantages

The cable offers Cat6 performance tested to 250 MHz and is backwards compatible with Cat5e and Cat5 equipment. Its U/UTP design reduces interference for more reliable signal transmission, while the factory-terminated RJ-45 connectors and latch protection simplify installation in tight or crowded patching environments. The short 0.25 m length is convenient for neat connections between nearby devices.

Suitable for

• Connecting a switch to a router or modem
• Patch panel to network device connections
• Short links between devices in home and small office networks
• Connections to keystone jacks or wall outlets

Key specifications

• Standard: Cat6, tested to 250 MHz
• Data rate: up to 10000 Mbit/s
• Length: 0.25 m
• Connectors: RJ-45 — both ends
• Shielding: U/UTP (unshielded twisted pairs, overall unshielded)
• Colour: Purple
• Weight: 0.02 kg
• Compatibility: Backwards compatible with Cat5e and Cat5

How to use

Plug one RJ-45 connector into the network port of one device (for example a switch, router or modem) and the other connector into the port of the second device, patch panel or wall jack. Ensure the latch on the connector snaps into place to secure the connection. For neat cabling, route the cable without sharp bends and avoid placing it close to strong sources of electrical interference.

Recommendations

Use this short Cat6 cable for close-range links between devices where a tidy, low-profile connection is needed. For longer runs, select an appropriately longer cable to maintain signal integrity and follow local installation standards.