Microconnect B-FTP6075 Καλώδιο δικτύου γκρι 7,5 m Cat6 F/UTP (FTP)

The Microconnect B-FTP6075 RJ-45 Cat6 7.5 m Grey is a 7.5 metre Cat6 networking cable designed for high-speed data transfer up to 10000 Mbit/s. The cable meets Cat6 requirements and is tested up to 250 MHz. It features RJ-45 connectors on both ends, F/UTP (foil-shielded with unshielded twisted pairs) construction and latch protection on the plugs to reduce the risk of connector damage during installation.

Advantages

The shielded F/UTP design reduces electromagnetic interference (EMI) and helps prevent crosstalk, supporting stable and reliable data transmission in home and office environments. Backwards compatibility with Cat5e and Cat5 ensures interoperability with existing infrastructure. The 7.5 m length and grey jacket make the cable suitable for typical desk-to-wall or equipment-to-patch-panel connections while the RJ-45 latch protection eases installation in confined spaces.

Suitable for

• Connecting switches, routers or modems to patch panels or wall outlets
• Small office and home network installations
• Wired connections for gaming, streaming and media devices
• Environments where EMI reduction is important

Key specifications

• Standard: Cat6, tested up to 250 MHz
• Data rate: up to 10000 Mbit/s (manufacturer specification)
• Length: 7.5 m
• Connectors: RJ-45 to RJ-45 with latch protection
• Shielding: F/UTP (foil shielded)
• Colour: Grey
• Weight: 0.19 kg

How to use

Insert each RJ-45 connector into the corresponding network port on your devices (switch, router, modem or wall outlet/patch panel) until the latch clicks into place. Ensure both ends are seated securely and route the cable to avoid sharp bends and sources of strong electromagnetic noise. For best performance, avoid excessive twisting or stretching and maintain the cable within recommended bend radius for Cat6 cables.

Recommendations

Use this Microconnect B-FTP6075 Cat6 cable for permanent or semi-permanent wired connections where EMI protection is required. For long runs or installations in electrically noisy environments consider further grounding and proper cable routing to maintain shield effectiveness.