Microconnect B-FTP602G Καλώδιο δικτύου πράσινο 2 m Cat6 F/UTP (FTP)

The Microconnect B-FTP602G RJ-45 Cat6 2 m Green is a 2 m shielded networking cable designed for reliable high-speed data transmission between network devices such as switches, modems, routers, patch panels, keystone jacks or wall outlets. It supports Cat6 performance up to 250 MHz, is backwards compatible with Cat5e and Cat5, and uses RJ-45 connectors with latch protection to reduce the risk of connector damage during installation. F/UTP shielding reduces electromagnetic interference (EMI) that can cause crosstalk and data degradation.

Advantages

The cable provides Cat6-rated performance tested to 250 MHz and supports data rates up to 10000 Mbit/s, offering compatibility with existing Cat5e/Cat5 infrastructure. Latch protection on the RJ-45 plugs helps prevent connector damage in tight installation spaces. The F/UTP (foil over twisted pair) shielding minimizes EMI and crosstalk, improving signal integrity in environments with electrical noise. A 2 m length and a distinct green jacket simplify cable identification in home or office setups.

Suitable for

• Connecting switches, routers, modems and patch panels
• Small office and home network installations
• Workstations, networked entertainment devices and smart home equipment
• Environments where EMI reduction is required

Key specifications

• Product name: Networking Cable Microconnect B-FTP602G RJ-45 Cat6 2 m Green
• Length: 2 m
• Connector: RJ-45 to RJ-45
• Cable standard: Cat6 (tested to 250 MHz)
• Shielding: F/UTP (foil over twisted pair)
• Maximum data rate: up to 10000 Mbit/s
• Compatibility: Backwards compatible with Cat5e and Cat5
• Colour: Green
• Weight: 0.046 kg

How to use

Connect one end of the Microconnect B-FTP602G cable to the RJ-45 port of a network device (switch, router, modem or wall outlet) and the other end to the corresponding RJ-45 port of the destination device or patch panel. Ensure that the plugs click into place using the latch protection and avoid sharp bends or excessive tension along the cable. For optimal performance, keep the cable away from strong sources of electrical noise where possible.

Recommendations

Use this F/UTP-shielded Cat6 cable for short runs up to 2 m in home or small office networks where EMI may affect signal quality. Avoid kinking the cable, and when routing through confined spaces ensure the connector latch is not subjected to pressure during installation.