Microconnect B-FTP6015PI Καλώδιο δικτύου ροζ 1,5 m Cat6 F/UTP (FTP)

The Microconnect B-FTP6015PI RJ-45 Cat6 1.5m Pink is a shielded Cat6 networking cable designed to connect network devices such as switches, modems or routers to each other or to structured cabling via patch panels, keystone jacks or wall outlets. The 1.5 m cable supports data rates up to 10000 Mbit/s and meets Cat6 performance up to 250 MHz. It features RJ-45 connectors with latch protection and F/UTP (B-FTP) shielding to reduce electromagnetic interference.

Advantages

This Cat6 cable provides Cat6-standard transmission up to 250 MHz while remaining backward compatible with Cat5e and Cat5 equipment. The F/UTP shielding reduces EMI and crosstalk, improving signal integrity and lowering error rates. Latch protection on the RJ-45 plugs helps prevent connector damage during tight installations. The cable’s pink colour and compact 1.5 m length make it suitable for visible, short-reach connections in home or small office environments.

Suitable for

• Connecting switches, routers or modems to patch panels or wall sockets
• Short-run connections between networked devices in home or small office setups
• Applications where reduced interference and reliable Cat6 performance are required

Key specifications

• Standard: Cat6, tested up to 250 MHz
• Length: 1.5 m
• Connectors: RJ-45 to RJ-45 with latch protection
• Shielding: F/UTP (overall foil shield) — B-FTP type
• Max data rate (manufacturer): 10000 Mbit/s
• Colour: Pink
• Weight: 0.034 kg
• Brand / MPN: MicroConnect / B-FTP6015PI

How to use

Plug one RJ-45 connector into the network device (router, switch or modem) and the other into the destination jack, patch panel or wall outlet. Ensure connectors are fully seated until the latch clicks to secure a reliable connection. Route the cable so that the shielding and connectors are not bent sharply; avoid routing parallel and close to large power cables to minimise residual interference.

Recommendations

For best performance, use the cable for short runs up to 1.5 m within home or small office environments and maintain proper bend radius. When connecting through patch panels or keystone jacks, verify that the installation maintains the shielding continuity for optimal EMI protection.