Microconnect B-FTP6015G Καλώδιο δικτύου πράσινο 1,5 m Cat6 F/UTP (FTP)

The MicroConnect B-FTP6015G is a 1.5 m Cat6 networking cable with RJ-45 connectors and F/UTP (foil over twisted pairs) shielding. It supports Cat6 performance up to 250 MHz, offers data rates up to 10000 Mbit/s, and is backwards compatible with Cat5e and Cat5. The cable includes latch protection to reduce risk of connector damage during tight installations and the green jacket provides clear visual identification in patching environments.

Advantages

Shielding (F/UTP) reduces electromagnetic interference (EMI) and helps prevent crosstalk and data errors, maintaining stable transmission. Cat6 construction and testing up to 250 MHz ensure reliable performance for high-speed LAN and structured cabling. Latch protection on the RJ-45 plugs protects the clip during installation in confined spaces. Backwards compatibility with Cat5e/Cat5 enables use with older equipment.

Suitable for

• Connecting switches, routers or modems to patch panels and wall outlets
• Small office and home networking
• Entertainment systems and media streaming devices
• Environments with potential electromagnetic interference

Key specifications

• Length: 1.5 m
• Standard: Cat6, tested up to 250 MHz
• Shielding: F/UTP (foil over twisted pairs)
• Connectors: RJ-45 to RJ-45
• Max data rate (manufacturer rated): up to 10000 Mbit/s
• Colour: Green
• Weight: 0.038 kg

How to use

Plug one RJ-45 connector into the network device (switch, router, modem) and the other into the patch panel, keystone jack or network port on the target device. Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid excessive pulling force to preserve shielding and conductor integrity. For permanent installations, secure the cable with appropriate cable management accessories and maintain separation from strong power sources when possible.

Recommendations

Use this shielded Cat6 cable in areas with potential EMI or where reliable high-speed connections are required. For best performance, avoid running the cable parallel and close to mains power lines and follow local structured cabling best practices.