Καλώδιο δικτύου BTR NETCOM Cat.6 Ultraflex500 5m

The BTR NETCOM Cat.6 Ultraflex500 5m is a fully shielded S/FTP networking cable designed for reliable high-speed data transmission in environments with limited space. With a compact boot and shielded RJ45 connectors on both ends, this 5-metre Cat.6 patch cord supports both shielded and unshielded class EA systems and is suitable for connections such as VoIP terminals and office or home network devices.

Advantages

This Cat.6 cable features S/FTP 4x2 AWG 26/7 PIMF construction with an LSHF (LSOH) halogen-free sheath for improved signal integrity and safety. The fully shielded design and two shielded RJ45 connectors provide 1:1 assignment and reduced electromagnetic interference. The ultraflex design enables a bending radius down to 10 mm and a very short cable boot for installations in confined spaces. Durability is increased compared with standard patch cords, allowing up to 8,500 movement cycles under load.

Suitable for

• Shielded and unshielded class EA network systems
• VoIP terminal devices and telephony
• Office and home network patching in limited-space environments
• High-density patch panels and confined cable channels

Key specifications

• Length: 5 m
• Cable type: S/FTP 4x2xAWG 26/7 PIMF
• Shielding: Fully shielded, two shielded RJ45 connectors, 1:1 assignment
• Sheath: LSHF (LSOH), halogen free
• Connector: RJ45 – shielded, both ends
• Bending radius: down to 10 mm
• Durability: up to 8,500 movement cycles under load

How to use

Connect the shielded RJ45 connectors to corresponding shielded ports on networking devices or patch panels, ensuring 1:1 pin assignment. Route the Ultraflex500 cable through confined spaces or cable channels, observing the minimum bending radius of approximately 10 mm. The short boot design facilitates connections in high-density panels; avoid twisting or excessive tensile load during installation to maintain performance.

Recommendations

For optimal shielding performance, terminate both ends to properly grounded shielded ports and avoid sharp bends or prolonged mechanical stress. Use this cable in installations requiring reliable Cat.6 performance and where space constraints demand a flexible, short-boot patch cord.