Μετατροπέας μέσων δικτύου BlueOptics BLMC011-012 10 Gigabit Ethernet

The BlueOptics BLMC011-012 10 Gigabit Ethernet media converter converts copper Ethernet to fiber optics and supports data rates of 100, 1000 and 10000 Mbit/s. Designed for SFP+ transceivers and finished in black, this compact device provides two SFP+ slots to connect 10 Gigabit optical links to existing copper infrastructure. The converter performs automatic speed negotiation and rate conversion between the copper RJ45 side and the fiber SFP+ side, allowing integration of fiber into unmanaged or mixed-speed networks without requiring changes to connected endpoints.

Advantages

The converter supports 10 Gigabit Ethernet while remaining backward compatible with 100 and 1000 Mbit/s links, enabling gradual network upgrades. Auto-MDIX and auto-negotiation simplify installation by detecting cable type and link speed automatically. Link pass-through and fiber fault alert functions propagate port status to connected equipment, helping to identify link problems quickly. A remote loopback function on the fiber interface assists with basic diagnostics. The unit does not include SFP+ transceivers, so you can select optical modules that match your reach and wavelength requirements.

Suitable for

Key specifications

How to use

Install the BlueOptics BLMC011-012 on a stable surface and connect the copper RJ45 cable to the copper port and an appropriate SFP+ transceiver to the SFP+ slot(s) with matching fiber patch cables. The device performs auto-negotiation and will adapt link speeds as needed. Ensure compatible SFP+ transceivers are used for the desired fiber type and distance. For safety and to avoid damage to transceivers, observe proper ESD precautions and follow the manufacturer manual for handling and connector mating procedures.

Recommendations

Use recommended Cat6A (or better) cabling for 10Gbps copper links and select SFP+ transceivers rated for the required distance and fiber type. Power the media converter from a stable supply and verify link LEDs and status indicators after connecting. For network troubleshooting, employ the remote loopback and monitor link pass-through/fault alerts. Refer to the official manual for detailed installation steps and ESD guidance.