Μετατροπέας δικτύου ALLNET ALL-MC104G-SFP1

The ALLNET ALL-MC104G-SFP1 Network Media Converter supports Gigabit Ethernet data rates up to 1000 Mbit/s and provides a compact solution for converting between copper (RJ-45) and fiber (SFP) links. Designed to comply with IEEE networking standards, this converter accepts multi-mode and single-mode SFP modules to extend network segments up to a maximum transfer distance of 550 m, making it suitable for short to mid-range fiber connections. The unit operates with low power consumption and includes LED indicators for link and power status; its black housing fits into rack or desktop installations where space is limited.

Advantages

The ALLNET ALL-MC104G-SFP1 offers a straightforward plug-and-play installation without complex configuration, supporting auto-negotiation across 10/100/1000 Mbit/s Ethernet speeds. The SFP fiber interface provides flexibility in choosing appropriate fiber transceivers (multi-mode or single-mode) to match infrastructure needs. Low power consumption and visible LEDs for link and power simplify monitoring and reduce operational costs. The compact, lightweight design facilitates deployment in constrained environments.

Suitable for

• Extending Ethernet networks over fiber for office floor-to-floor connections
• Connecting copper-based network equipment to fiber backbone segments
• Small- and medium-sized enterprise access links where gigabit throughput is required
• Temporary or permanent fiber links in installations with limited space

Key specifications

• Maximum data transfer rate: 1000 Mbit/s
• Ethernet LAN ports: 1 x RJ-45 (10/100/1000 Mbit/s)
• Fiber ports: 1 x SFP slot (supports multi-mode and single-mode modules)
• Maximum transfer distance over fiber: up to 550 m (depends on module and fiber type)
• Power consumption: maximum 3 W
• Indicators: Link and Power LEDs
• Product colour: Black
• Weight: 0.28 kg

How to use

Install an appropriate SFP transceiver into the SFP slot compatible with your fiber type, connect the fiber cable to the transceiver, and plug an Ethernet cable into the RJ-45 port of the converter. Power the unit and observe the LED indicators to confirm link and power status. The device supports auto-negotiation and typically requires no additional configuration; ensure that connected devices are set to compatible speed and duplex settings if manual configuration is used.

Recommendations

For reliable operation, use SFP transceivers and fiber cable types that match the required distance and environment. Maintain proper fiber handling practices to avoid contamination of connectors. Place the converter in a ventilated area away from direct heat sources, and verify link LEDs after installation to confirm proper connectivity.