Lindy 47670 Καλώδιο δικτύου κίτρινο 30 m Cat7 S/FTP (S-STP)

Cat.7 S/FTP network cable with support for bandwidth up to 600 MHz, designed for Ethernet standards up to 10GBase-T. The cable is built with total braided shielding and individual pair foil shielding (S/FTP) and is suitable for use in data centres, server rooms, rack-mounted network and control cabinets. Manufactured and tested to ISO/IEC 11801, the cable is supplied individually in a polybag. Gold-plated contacts provide corrosion-resistant connections and a snagless strain relief protects the connector latch during installation and removal. Although the original Cat.7 specification referenced GG45 connectors, modern RJ45 connectors meet Cat.7 performance in practice; the cable marking therefore reads: "Cat.6A S/FTP patch cords with 600MHz raw cable".

Advantages

The S/FTP construction offers high protection against electromagnetic interference and crosstalk, enabling reliable data transmission at frequencies up to 600 MHz and supporting 10GBase-T networks. Gold-plated contacts improve long-term contact reliability and resistance to corrosion. The snagless connector design reduces the risk of latch damage during repeated installations and cable routing. Compliance with ISO/IEC 11801 ensures the cable meets international structured cabling requirements.

Suitable for

• Data centres and server rooms
• Rack-mounted network and control cabinets
• 10GBase-T Ethernet connections
• High-density cabling installations where interference protection is required

Key specifications

• Cable category: Cat.7 (S/FTP construction)
• Bandwidth / frequency: up to 600 MHz
• Shielding: braided overall + foil per pair (S/FTP)
• Connector type: RJ-45 to RJ-45
• Data standard: suitable for 10GBase-T
• Standards: manufactured and tested to ISO/IEC 11801
• Contacts: gold-plated
• Design: snagless strain relief on connectors
• Available lengths: 0.3 m, 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m, 7.5 m, 10 m, 15 m, 20 m, 30 m
• Available colours: Black, Blue, Grey, Red, White, Yellow, Green

How to use

Connect the RJ-45 plugs to the corresponding network ports on devices, switches or patch panels. Route the cable to avoid sharp bends and excessive pulling tension; the snagless strain relief helps protect the connector latch during handling. For high-density racks, label and separate colour-coded lengths to simplify identification and maintenance. Verify link speed and integrity after installation using appropriate network testing tools.

Recommendations

For best performance maintain bend radii recommended by the manufacturer and avoid running parallel to unshielded power cabling; use the shielded design to reduce interference in electrically noisy environments. Choose the length and colour that match your rack or patching scheme to simplify cable management.