Lindy 47667 Καλώδιο δικτύου κίτρινο 10 m Cat7 S/FTP (S-STP)

Cat.7 S/FTP network cable supporting bandwidths up to 600 MHz with a snagless connector design and gold‑plated contacts, suitable for Ethernet standards up to 10GBase‑T. The cable uses S/FTP construction (overall braid with individual foil shielding for each pair) developed for data centres, server rooms and rack‑mounted network or control cabinets. Manufactured and tested according to ISO/IEC 11801, the cables are individually packaged in polybags. The RJ‑45 connectors meet practical Cat.7 requirements despite the original Cat.7 GG45 connector concept; the cable marking may read "Cat.6A S/FTP patch cords with 600MHz raw cable".

Advantages

The S/FTP shielding reduces electromagnetic interference and crosstalk, supporting reliable data transmission at frequencies up to 600 MHz and 10GBase‑T performance. Gold‑plated contacts provide corrosion resistance and stable conductivity over long periods. The snagless strain relief protects the connector latch from damage during installation and removal. Available in multiple lengths and colours to suit different installation needs.

Suitable for

• Data centres and server rooms
• Rack‑mounted network and control cabinets
• High‑speed Ethernet up to 10GBase‑T
• Patch panels and structured cabling installations

Key specifications

• Cable category: Cat.7 (S/FTP construction)
• Operating frequency: up to 600 MHz
• Ethernet standard: up to 10GBase‑T
• Connectors: RJ‑45 — gold‑plated contacts
• Strain relief: snagless design
• Standards: manufactured and tested to ISO/IEC 11801
• Available lengths: 0.3 m, 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m, 7.5 m, 10 m, 15 m, 20 m, 30 m
• Available colours: Black, Blue, Grey, Red, White, Yellow, Green

How to use

Choose the appropriate cable length and colour for your installation. Insert RJ‑45 connectors into corresponding Ethernet ports on devices, patch panels or switches until the latch clicks. Route the cable through racks or cable management channels, avoiding sharp bends and sources of strong electromagnetic interference. When removing the cable, press the latch and pull the connector straight out to avoid stressing the strain relief.

Recommendations

For optimal performance maintain bend radii recommended by the manufacturer, avoid running the cable in parallel with high‑voltage power lines, and use suitable patch panels or cable managers in rack installations. Although marked as Cat.6A on some prints, the S/FTP construction and RJ‑45 connectors support practical Cat.7 performance up to 600 MHz and 10GBase‑T.