Lindy 47513 Καλώδιο δικτύου κόκκινο 3 m Cat6 U/UTP (UTP)

Cat.6 U/UTP flat network cable Lindy 47513, 3 m, red — designed for data transmission up to 250 MHz and Gigabit Ethernet (1GBase-T). The cable uses an unshielded U/UTP construction with a flat ribbon profile for installation in restricted or limited spaces. Connectors are gold plated and the cable is manufactured and tested according to ISO/IEC 11801; each cable is packaged individually in a polybag.

Advantages

The flat Cat6 design provides high operating frequency up to 250 MHz while remaining flexible and thin for routing in tight spaces. Gold-plated RJ-45 contacts reduce corrosion and maintain reliable electrical contact over time. A snagless strain-relief connector protects the latch from damage during plugging and unplugging. The cable supports Gigabit Ethernet performance despite being unshielded, due to its optimized electrophysical parameters.

Suitable for

• Connecting network devices (PCs, switches, routers) at 1 Gbps
• Installations in narrow cable channels, under carpets or along skirting boards
• Home and small office network patching
• Temporary setups and events where compact cabling is required

Key specifications

• Standard: Cat.6 (ISO/IEC 11801)
• Construction: U/UTP (unshielded, twisted pairs), flat ribbon
• Bandwidth / frequency: up to 250 MHz
• Data rate: supports up to 1GBase-T (Gigabit Ethernet)
• Length: 3 m
• Connectors: RJ-45 to RJ-45, gold-plated contacts, snagless strain relief
• Colour: Red

How to use

Plug the RJ-45 connectors into the corresponding network ports on your devices (switch, router, PC). Route the flat cable through narrow gaps, along skirting boards, or under carpets as needed, taking care not to bend sharply at the connector ends. Ensure both ends are fully inserted until the latch clicks to establish a stable connection. For best performance, avoid running the cable parallel to high-voltage power lines over long distances.

Recommendations

The cable is suitable for indoor use; avoid exposure to excessive moisture or direct sunlight. For installations requiring shielding or PoE with higher power levels, verify compatibility with your equipment and local standards before use.