Lindy 45373 καλώδιο δικτύου μπλε 0,5 m Cat6a S/FTP (S-STP)

The Lindy Cat.6 (A) SSTP RJ-45 networking cable, 0.5 m in length and blue in colour, is a shielded Ethernet cable designed for high-speed data transmission up to 10GBase-T. It features an overall braided shield and foil shields for each twisted pair (S/FTP), meets ISO/IEC 11801 specifications and supports operating frequencies up to 500 MHz. The cable is halogen-free (LSZH) and supplied individually in a polybag.

Advantages

The SSTP construction with both braid and foil shielding reduces electromagnetic interference and crosstalk, maintaining signal integrity for demanding network environments. Gold-plated RJ-45 contacts provide corrosion resistance and long-term reliable connections. The snagless strain relief protects the connector latch during installation and removal, while the LSZH sheath limits smoke and toxic gas emissions, making the cable suitable for public or enclosed spaces.

Suitable for

• 10 Gigabit Ethernet (10GBase-T) connections
• Short patch connections between network devices (switches, routers, servers)
• Environments requiring reduced electromagnetic interference
• Installations in public or enclosed areas where low smoke and halogen-free materials are required

Key specifications

• Cable type: Cat.6A S/FTP (SSTP) with braid overall shield and foil for pairs
• Length: 0.5 m
• Connectors: RJ-45 to RJ-45, gold-plated contacts
• Bandwidth / frequency: up to 500 MHz
• Standards: supports 10GBase-T, manufactured and tested to ISO/IEC 11801
• Sheath: LSZH (halogen-free)
• Colour: Blue

How to use

Plug each RJ-45 connector into the corresponding Ethernet port on your network devices (for example, switch to server or router to switch). Ensure connectors are fully inserted until the latch clicks to establish a secure connection. For neat cabling, route the 0.5 m cable without tight bends and avoid excessive strain on the connectors despite the snagless relief.

Recommendations

For best performance, use this Cat.6A SSTP cable for short interconnections within racks or between adjacent network devices, keep cable length within recommended limits for 10GBase-T deployments, and avoid running the cable parallel to high-power electrical lines to reduce potential interference.