Καλώδιο τηλεφώνου ShiverPeaks BS70003 3 m Μαύρο

The ShiverPeaks BS70003 telephone cable is a 3 m connection lead designed to link telephone devices to wall sockets or compatible adapters. One end is fitted with a TAE F connector and the other with an RJ11 plug, delivering a stable wired connection for analogue telephones, cordless base stations and other telephony equipment. The cable is finished in black and constructed for regular home or office use.

Advantages

This telephone cable provides reliable signal transmission and a secure physical connection thanks to its standard TAE F to RJ11 wiring. Its 3-meter length offers flexible placement of devices without the need for extensions. The black jacket resists everyday wear and blends unobtrusively with typical interior environments. The cable is compatible with a wide range of analogue telephone equipment and is suitable for straightforward plug-and-play installation.

Suitable for

• Connecting analogue landline telephones to wall sockets
• Linking cordless base stations or DECT bases to the telephone line
• Replacing worn or damaged telephone leads
• Office workstations and residential telephone connections

Key specifications

• Cable length: 3 metres
• Connectors: TAE F on one end, RJ11 on the other
• Color: black
• Intended use: analogue telephone line connections
• Construction: single lead with insulated conductors and protective outer jacket

How to use

Insert the TAE F connector into the corresponding wall socket or adapter and plug the RJ11 connector into the telephone device or base station. Ensure connectors are fully seated to establish a secure mechanical and electrical connection. If relocating devices, disconnect by pulling on the connector housing rather than the cable to avoid strain on the conductors. No special tools or configuration are required for standard analogue phone systems.

Recommendations

Position the cable to avoid sharp bends and avoid running it parallel to high-voltage power lines to minimize interference. For permanent or exposed installations, verify that the routing does not subject the cable to mechanical stress, crushing or moisture. Replace the cable if the outer jacket shows cuts or the connectors become loose.