Καλώδιο SATA DeLOCK 85810 1 m SATA 7 ακίδων eSATA μαύρο

The DeLOCK 85810 SATA cable is a 1 m black data cable with a 7‑pin SATA connector on one end and an eSATA connector on the other. It supports SATA II transfer modes and is intended to provide a straightforward, reliable link between internal storage devices and external eSATA-enabled ports. The cable is flexible enough for typical PC installations and is supplied in a polybag for compact storage.

Advantages

This SATA cable offers consistent data transfer rates compatible with SATA II interface standards and a standard 7‑pin connector that fits common hard drives and SSDs. The eSATA end enables connection to external eSATA ports without adapters, while the 1 m length balances reach and cable management inside desktop environments. Its black jacket provides a neutral appearance that integrates with most system interiors.

Key specifications

• Cable type: SATA II
• Cable length: 1 m
• Connector 1: SATA 7-pin
• Connector 2: eSATA
• Colour: Black

How to use

Connect the 7‑pin SATA connector to the internal SATA port of a hard drive or SSD, ensuring the keyed connector aligns with the device socket. Plug the eSATA connector into the external eSATA port on a compatible host or enclosure. Avoid excessive bending near the connectors and secure routing inside the case to prevent strain. After connection, power the storage device and verify that the host system recognizes the drive through its operating system or BIOS/UEFI.

Recommendations

For stable performance, use this cable for SATA II (3 Gbit/s) compatible devices; if higher transfer rates are required, consider cables and ports rated for newer SATA standards. Keep the cable away from high‑frequency power lines and sharp edges, and ensure connectors are fully seated before powering devices.