Καλώδιο οπτικών ινών Televes 236110 1 m FC γκρι

The Televes 236110 is a 1 m single-mode (G.657.A2) pre-terminated fibre optic patch cord with FC/PC connectors on both ends. The cable includes a shielded stainless-steel tube around the fibre, an aramid (Kevlar) traction protection layer and an LSFH ultraviolet-resistant outer sheath, providing suitable mechanical protection for outdoor and direct-burial installations while maintaining low signal loss for reliable data transmission.

Advantages

This Televes FC Grey patch cord offers single-mode performance (G.657.A2) with FC/PC terminations for consistent low-loss connections. The stainless-steel tube and aramid reinforcement increase mechanical strength and tensile resistance, while the LSFH UV-resistant sheath enables outdoor use and limited underground deployment. Supplied pre-terminated and individually packed, it simplifies installation and reduces termination errors in network setups.

Suitable for

• Interconnection of optical network elements equipped with FC/PC ports
• Optical LNB connections and satellite headend equipment
• Outdoor fibre runs and short direct-burial segments
• Patch panels and point-to-point single-mode links

Key specifications

• Brand: Televes
• Model / MPN: 236110
• EAN: 8424450186541
• Length: 1 m
• Fibre type: Single-mode G.657.A2
• Connectors: FC/PC — both ends
• Construction: Stainless-steel tube shielding, aramid (Kevlar) traction layer
• Sheath: LSFH, UV-resistant
• Packaging: Individually packed, pre-terminated

How to use

Verify compatibility of equipment FC/PC ports before connecting. Route the 1 m patch cord to avoid sharp bends and excessive tension; the aramid layer provides traction protection but the specified minimum bend radius for single-mode G.657.A2 should be observed. Insert the FC/PC connectors into the corresponding optical ports until the connectors click or seat securely, then secure any strain-relief or cable management hardware. Test optical continuity and insertion loss after installation to confirm connection quality.

Recommendations

The cable is designed for short interconnects where a pre-terminated, durable single-mode connection is required. Avoid prolonged exposure to chemical agents and do not exceed the recommended bend radius. For long underground runs, use appropriate conduit and additional protective cabling as needed.