Καλώδιο DMX PSSO 3022783G IP65 3-polig 10 m

DMX cable PSSO 3022783G IP65 3-pin 10 m is a weather-resistant DMX cable engineered for control signal transmission in lighting systems. With a 3-pin connector configuration and a 10 metre length, this cable is designed to link DMX controllers and lighting fixtures while providing IP65-rated protection against dust and low-pressure water jets. The construction supports reliable signal continuity for indoor and outdoor installations where a sealed connection is required.

Advantages

The IP65-rated housing and connectors provide improved resistance to dust and moisture compared with non-sealed DMX leads, reducing the risk of signal disruption in variable environments. The three-conductor design maintains standard DMX512 wiring compatibility for straightforward integration with existing controllers and fixtures. A practical 10 m length balances reach and cable management for stage, venue, and temporary outdoor setups.

Suitable for

Key specifications

How to use

Route the DMX cable between the controller and the target fixture, ensuring connectors are aligned and fully engaged. Tighten any threaded or locking elements on the IP65 connectors to achieve the sealed rating; avoid leaving protective caps off when exposed to weather. For daisy-chaining fixtures, connect the cable output of one fixture to the input of the next, maintaining correct DMX channel and addressing practices on each device. Inspect connections visually before power-up to confirm secure seating and intact sealing elements.

Recommendations

For long-term outdoor installations, periodically check seals and connector threads for wear and dirt. Use appropriate cable supports and strain relief to avoid stress at connector joints, and route cables to minimize exposure to direct sunlight and mechanical abrasion.