Καλώδιο δικτύου Wirewin S/FTP CAT6 0,75m

The Wirewin S/FTP CAT6 networking cable (0.75 m) provides a compact Cat6 solution for wired networks. Constructed with 100% copper conductors and an LSZH (Low Smoke Zero Halogen) jacket, the cable supports data transfer rates up to 1000 Mbit/s and uses RJ-45 connectors on both ends. Its slim profile and reinforced boot design make it suitable for installations in confined spaces while protecting the connector during insertion and removal.

Advantages

This CAT6 patch cord uses full copper conductors for consistent signal transmission and reduced attenuation. The LSZH coating minimizes toxic smoke in case of fire and is suitable for installations where low-smoke materials are required. A special slim boot design enables easy connector push action and provides additional protection to the RJ-45 plug. Available in multiple colours and lengths, the cable allows colour-coding and flexible routing.

Suitable for

• Short links between switches, patch panels and network devices
• Home and office network patching where space is limited
• Structured cabling requiring Cat6 performance up to 1000 Mbit/s

Key specifications

• Standard: Cat6 (S/FTP)
• Length: 0.75 m
• Conductor: 100% copper
• Jacket: LSZH (Low Smoke Zero Halogen)
• Connectors: RJ-45 — both ends
• Maximum data rate: up to 1000 Mbit/s
• Brand: slim wirewin
• MPN: PKW-PIMF-KAT6 0.75 GN
• EAN: 9120042368140

How to use

Connect one RJ-45 plug to the network device (switch, router or computer) and the other plug to the corresponding port on the patch panel or device. Ensure the connectors are fully inserted until they click to secure the connection. Route the slim cable to avoid sharp bends and excessive tension that could damage the conductor or connector.

Recommendations

For best performance, avoid running the cable parallel and close to high-voltage power lines and keep bend radius above manufacturer guidelines. Use colour and length options to organise patch panels and simplify maintenance.