Καλώδιο δικτύου S-FTP Telegärtner Cat.7 10 m MP8 FS600 LSZH λευκό

S-FTP Networking Cable Telegärtner Cat.7 10m MP8 FS600 LSZH White is a 10‑metre patch cable designed for high‑performance network connections. The cable uses Cat.7 S/FTP construction with individual pair foil shielding and overall braid, terminated to the EIA/TIA 568 wiring sequence, and is fitted with fully shielded RJ45 plugs to minimise electromagnetic interference. The jacket and moulded strain relief boot are made from LSZH material for reduced smoke and no halogen emissions in case of fire.

Advantages

This Cat.7 patch cord supports up to 600 MHz bandwidth and is suitable for demanding Ethernet applications, offering 360° surround shielding on the plug and flexible, strain‑relieved moulded boots for durable handling. The LSZH jacket improves safety in confined or public spaces. Termination follows the standard EIA/TIA 568 sequence to ensure compatibility with common network equipment.

Suitable for

• High‑speed Ethernet links (including 10 Gbps where supported)
• Office network installations and patch panels
• Environments requiring low smoke and zero halogen materials
• Shielded cabling requirements to reduce EMI/RFI interference

Key specifications

• Type: S/FTP (shielded foiled twisted pairs with overall braid)
• Category: Cat.7; ISO/IEC 11801 edition 2
• Bandwidth: up to 600 MHz
• Length: 10 m
• Connector: fully shielded RJ45, 360° plug shielding
• Jacket / boot material: LSZH (Low Smoke Zero Halogen)
• Wiring: EIA/TIA 568 termination, 1:1 wiring
• Brand / MPN: Telegärtner, L00005A0051
• EAN: 4018359306359

How to use

Connect one end of the RJ45 plug to your network device (switch, router, NIC) and the other end to the corresponding port or patch panel. Ensure both connectors are fully inserted until they click to guarantee proper contact. Avoid sharp bends and maintain the cable bend radius recommended by network equipment manufacturers to preserve shielding and performance.

Recommendations

For optimal performance, use this Cat.7 S‑FTP patch cord in shielded networking environments and route the cable away from strong electrical noise sources. Do not exceed the specified 10 m length in patching scenarios where additional attenuation may affect high‑speed links.