Καλώδιο δικτύου ROLINE UTP Patch Cat.6 RJ-45 15m γκρι

Patch cable for networking connections between devices. This ROLINE UTP Patch Cord Cat.6 with RJ-45 connectors on both ends is a 15 m unshielded twisted pair cable designed for reliable data transmission. The cable uses 4-pair stranded copper conductors and contact wiring 1:1 in accordance with the EIA/TIA 568 standard. High-quality gold-plated contacts and moulded kink protection increase durability while the flexible construction allows narrow bending during installation.

Advantages

The Cat.6 specification supports higher data rates and improved signal performance compared with lower categories. U/UTP (unshielded) construction reduces cost and is suitable for typical home and office environments. Gold-plated RJ-45 plugs ensure corrosion resistance and stable contact, while moulded strain relief protects the connector area from damage and cable breakage.

Suitable for

• Connecting computers, routers, switches and network devices
• Home and small office Ethernet installations
• Structured cabling where Cat.6 performance is required
• Temporary or permanent patching in server rooms and network cabinets

Key specifications

• Length: 15 m
• Category: Cat.6
• Cable type: U/UTP (unshielded twisted pair), 4-pair stranded copper
• Connectors: RJ-45 — RJ-45, gold-plated contacts
• Contact wiring: 1:1 (EIA/TIA 568)
• Colour: Grey
• Manufacturer: ROLINE, MPN 21.15.0945, EAN 7611990156184

How to use

Plug one RJ-45 connector into the network port of your device and the other connector into the corresponding port on the switch, router or wall socket. Ensure connectors click into place to confirm a secure connection. Route the cable avoiding sharp edges and tight kinks; the moulded strain relief reduces stress but standard cable handling practice should be followed. For best performance, keep the cable away from strong electromagnetic sources such as large transformers or unshielded power cables.

Recommendations

Use this Cat.6 patch cord for Ethernet links up to the full 15 m length. For longer permanent runs inside walls or between floors, consider using certified in-wall rated cable or structured cabling components. Test connections with a network tester after installation to verify continuity and signal quality.