Καλώδιο δικτύου Microconnect SSTP615Y κίτρινο 15 m Cat6 S/FTP (S-STP)

The MicroConnect SSTP615Y is a 15 m Cat6 S/FTP networking cable designed to connect switches, modems, routers and other network devices to patch panels, keystone jacks or wall outlets. Tested to the Cat6 standard up to 250 MHz and supporting data rates up to 10000 Mbit/s, this yellow cable combines length and clear identification with shielding that reduces electromagnetic interference for stable signal transmission.

Advantages

S/FTP shielding provides protection against EMI and crosstalk, helping to maintain signal integrity and lower error rates. The cable is backward compatible with Cat5e and Cat5 installations. A reinforced latch protection on the RJ45 connector reduces the risk of clip damage during installation in tight spaces. Its 15 m length and bright yellow color simplify cable management and identification in home or office networks.

Suitable for (tasks / use cases)

• Connecting routers, modems and switches to patch panels or wall outlets
• Small office and home network cabling
• VoIP phones, NAS devices and networked media players
• Environments where reduced EMI and reliable high-speed links are required

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: S/FTP (overall shield with individually shielded pairs)
• Length: 15 m
• Maximum data rate: up to 10000 Mbit/s
• Colour: Yellow
• Backward compatibility: Cat5e, Cat5
• Connector protection: latch protection on RJ45 plug

How to use

Connect one RJ45 end to the network device (switch, router or modem) and the other end to the target outlet, patch panel or keystone jack. Ensure connectors are fully inserted until the latch clicks and route the cable to avoid tight bends and sharp edges. For best performance, keep the cable away from strong sources of interference and avoid running it in parallel with power cables for long distances.

Recommendations

For stable high-speed connections, use the MicroConnect SSTP615Y in shielded or controlled environments and terminate both ends with compatible Cat6 ports. Inspect the latch protection before installation in confined spaces to prevent connector damage.