Καλώδιο δικτύου Microconnect SSTP607S μαύρο 7 m Cat6 S/FTP (S-STP)

The Microconnect SSTP607S RJ-45 Cat6 networking cable is a 7 m black cable designed for reliable wired connections between network devices such as switches, modems and routers, or to infrastructure components like patch panels, keystone jacks and wall outlets. Built to the Cat6 standard and tested up to 250 MHz, it supports data transfer rates up to 10000 Mbit/s and is backwards compatible with Cat5e and Cat5.

Advantages

This S/FTP (S-STP) shielded cable reduces electromagnetic interference (EMI) and crosstalk to maintain signal integrity and lower transmission errors. It includes latch protection on the RJ-45 connectors to prevent damage during installation in tight spaces. The 7 m length and black finish provide a practical, unobtrusive option for small office, home and professional network setups.

Suitable for

• Connecting switches, routers and modems to each other or to patch panels
• Structured cabling to keystone jacks and wall outlets
• Small office and home networks
• High-speed Ethernet applications requiring shielding against EMI

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Length: 7 m
• Connectors: RJ-45 — RJ-45
• Throughput: up to 10000 Mbit/s
• Shielding: S/FTP (S-STP)
• Colour: Black
• Weight: 0.13 kg
• Brand: MicroConnect, MPN: SSTP607S, EAN: 5704327713272

How to use

Connect one RJ-45 connector to your network device (for example a switch, modem or router) and the other connector to the destination port such as a patch panel, keystone jack or wall outlet. Ensure connectors are fully inserted until the latch clicks and route the cable to avoid sharp bends and sources of strong interference. For best performance, keep cable runs within recommended length limits for Ethernet and avoid tight coils or knotting.

Recommendations

Use the Microconnect SSTP607S in environments where EMI is present or likely, and when a back-compatible Cat6 solution is required. For rack installations, secure the cable with appropriate clips or ties and avoid running parallel to high-voltage power lines to minimise interference.