Καλώδιο δικτύου Microconnect B-FTP503 γκρι 3 m Cat5e F/UTP (FTP)

The Microconnect B-FTP503 is a 3 m Cat5e F/UTP (FTP) networking cable with RJ-45 connectors on both ends. Designed for wired connections between devices such as switches, routers, modems and patch panels, this grey cable supports standard Cat5e performance and includes foil shielding to reduce electromagnetic interference.

Advantages

The shielded F/UTP construction reduces EMI and crosstalk, helping to maintain signal integrity and lower error rates. The cable is tested to the Cat5e standard (up to 100 MHz) and is backward compatible with Cat5 installations. Built-in latch protection prevents connector damage during installation in tight spaces. With RJ-45 connectors on both ends and a 3 m length, it suits common desktop and rack connections.

Suitable for

• Connecting PCs, switches and routers in home and small office networks
• Wiring between patch panels and network devices
• Audio/video and entertainment network connections requiring reduced interference
• Temporary or permanent desk and cabinet cabling where a 3 m length is appropriate

Key specifications

• Standard: Cat5e (tested to 100 MHz)
• Type: F/UTP (FTP) — foil-shielded twisted pair
• Connectors: RJ-45 to RJ-45
• Length: 3 m
• Estimated supported data rate: up to 1000 Mbit/s (per product summary)
• Colour: Grey
• Weight: 0.07 kg
• Brand / MPN: MicroConnect B-FTP503

How to use

Plug each RJ-45 connector into the corresponding network ports on your devices (for example, from a router to a switch or from a patch panel to a network device). Ensure connectors click into place via the latch protection. Route the cable to avoid sharp bends and strong electromagnetic sources where possible. The shielding reduces EMI, but keep the cable clear of high-voltage power lines for best performance.

Recommendations

For reliable results, use this Cat5e F/UTP cable for standard 100BASE-TX and Gigabit-capable setups within short runs up to 3 m; verify connectors are fully seated and avoid excessive bending or kinking during installation.