Καλώδιο δικτύου M-Cab 2m CAT7 RJ-45 S/FTP Πράσινο

The M-Cab 2m CAT7 RJ-45 S/FTP Green is a 2-metre network cable designed for high-speed wired connections. It supports data transfer rates up to 10000 Mbit/s and uses S/FTP shielding to reduce electromagnetic interference and crosstalk. Both ends are fitted with RJ-45 connectors for compatibility with routers, switches, network cards and other Ethernet-enabled devices. The green jacket identifies the cable visually and helps with cable management in multi-cable installations.

Advantages

S/FTP shielding around each pair and an overall foil enhances signal integrity in environments with potential interference from nearby electrical equipment. The CAT7 specification supports higher frequencies and improved performance compared with earlier cable categories, enabling reliable gigabit and multi-gigabit connectivity. A 2 m length balances reach and tidy routing for most desktop and rack-mounted setups, while standard RJ-45 connectors ensure broad device compatibility.

Suitable for

• Connecting desktop PCs, laptops and network printers to routers or switches
• Short cable runs in server racks and patch panels
• Home or small office wired networks requiring high data rates
• Environments with nearby electrical equipment where reduced interference is needed

Key specifications

• Cable category: CAT7 (S/FTP)
• Maximum data rate: up to 10000 Mbit/s
• Length: 2 m
• Connectors: RJ-45 to RJ-45
• Shielding: Individual pair foil with overall braided/foil shielding (S/FTP)
• Colour: Green

How to use

Plug one RJ-45 connector into the Ethernet port of your device and the other into the corresponding port on the router, switch or patch panel. Ensure connectors click into place to secure the connection. Route the cable to avoid sharp bends and keep it away from power cables where possible to minimise interference. For rack installations use cable ties or management panels to maintain a neat routing and to prevent strain on the connectors.

Recommendations

Use the cable for short to medium runs up to 2 m; avoid tight bends and excessive pulling force when installing. Verify that connected equipment supports the desired data rates and use ferrules or boots if additional strain relief is required for frequent reconnection.