Καλώδιο δικτύου LogiLink CQ6145S RJ-45 Cat6a 50 m μαύρο

The LogiLink CQ6145S RJ-45 Cat6a 50 m black networking cable is a high-performance patch cable designed for industrial and commercial use. It supports data transfer rates up to 10000 Mbit/s and features S/FTP shielding with RJ-45 connectors on both ends. The cable’s abrasion‑resistant polyurethane (PUR) sheath provides protection against heat, oil, moisture and UV exposure, making it suitable for fixed installations and occasional movement in dry and damp environments; it is not waterproof and not intended for underground installation.

Advantages

The polyurethane (PUR) outer jacket increases resistance to mechanical wear, oils and UV radiation while maintaining flexibility for installation. S/FTP shielding reduces electromagnetic interference for stable high‑speed transmission. With a 50 m length and standardized RJ‑45 connectors, the cable is compatible with common network devices and supports Cat6a performance for up to 10 Gbps connections.

Suitable for

• Fixed network installations in offices and industrial facilities
• Temporary or occasional movement in dry and damp indoor environments
• Outdoor use where low mechanical stress is expected (not for submerged or underground use)

Key specifications

• Model: LogiLink CQ6145S
• Category: Cat6a, S/FTP
• Length: 50 m
• Connectors: RJ-45 to RJ-45
• Data rate: up to 10000 Mbit/s (10 Gbps)
• Sheath material: polyurethane (PUR), black
• Not waterproof; not suitable for underground installation

How to use

Connect the RJ‑45 connector at one end to your network device (switch, router, patch panel) and the other end to the corresponding port on the receiving device. Route the cable avoiding sharp edges, excessive bending and high mechanical loads to preserve the PUR sheath. For outdoor runs choose paths with minimal exposure to direct impact and do not bury the cable underground. Ensure connectors are fully inserted and secured to maintain reliable contact and optimal performance.

Recommendations

Use this LogiLink Cat6a PUR patch cable for high-speed links where enhanced mechanical and environmental resistance is required. Avoid permanent immersion in water and do not install underground; if permanent outdoor or buried installation is needed, select a cable specifically rated for those conditions.