Καλώδιο δικτύου LogiLink C6A102S RJ-45 Cat6a 15 m γκρι

The LogiLink C6A102S RJ-45 Cat6a 15 m Grey networking cable is a Cat6a S/FTP patch cable designed for stable, high-speed Ethernet connections over a 15‑metre run. Fitted with RJ‑45 connectors on both ends, the cable supports 10GBase‑T applications and is intended for use where reduced electromagnetic interference and consistent signal integrity are required. The grey outer sheath provides a neutral appearance suitable for office, server room or home network installations.

Advantages

The S/FTP shielding construction combines an overall foil with individually shielded pairs to reduce crosstalk and external electromagnetic interference, improving performance for 10GBase‑T networks. Factory‑terminated RJ‑45 plugs ensure plug‑and‑play connectivity without the need for field crimping. The 15 m length covers longer runs between network equipment while maintaining the signal characteristics expected from Cat6a cabling.

Suitable for

• 10 Gigabit Ethernet connections (10GBase‑T) over short to medium distances
• Connecting switches, routers, patch panels and networked servers
• Office and data centre patching where EMI protection is required
• Structured cabling in professional and home network environments

Key specifications

• Cable category: Cat6a
• Cabling technology: 10GBase‑T
• Shielding type: S/FTP (overall foil with individually shielded pairs)
• Connector type: RJ‑45 on both ends
• Cable length: 15 m
• Colour: Grey

How to use

Route the cable between the two network endpoints, avoiding tight bends and sources of strong electromagnetic interference where possible. Insert the RJ‑45 connectors firmly into the corresponding ports on your network devices until the retention clip engages. For permanent installations, secure the cable along cable trays or trunking to prevent strain on connectors. Test the connection with a network tester or by verifying link speed and stability on the connected devices.

Recommendations

Use this Cat6a S/FTP cable for runs up to 15 m where 10GBase‑T speeds and reduced interference are required. Avoid routing alongside high‑power electrical cables and maintain bend radius recommendations to preserve performance. For environments with extreme EMI or longer distance requirements, consider shielded infrastructure and appropriate transceivers or fibre solutions.