Καλώδιο δικτύου LogiLink 0,5 m Cat.6A RJ-45 S/FTP μαύρο

The LogiLink 0.5m Cat.6A RJ-45 S/FTP networking cable supports 10G data transmission for short-range connections. It features RJ-45 connectors on both ends, S/FTP (shielded foiled twisted pair with overall braid) construction and AWG 26/7 conductor strands made of bare copper. The cable has an LSZH (low smoke zero halogen) jacket and complies with ISO/IEC 11801, EN50288 and TIA/EIA 568-C.2 standards.

Advantages

The S/FTP shielding and PIMF (pair in metal foil) design reduce electromagnetic interference and crosstalk, supporting stable high-speed 10G performance. The AWG 26/7 stranded conductors ensure flexible handling and reliable signal transmission, while the LSZH jacket limits toxic smoke and corrosive gases in case of fire. The 0.5 m length is suitable for compact setups where a short patch cable is required.

Suitable for

• Patch connections between network devices in racks and switches
• Short links between patch panels and switches
• Connections in office desks, workstations and server cabinets
• High-speed Ethernet applications up to 10 Gbps

Key specifications

• Length: 0.5 m
• Category: Cat.6A, 10G
• Shielding: S/FTP (PIMF)
• Conductor: AWG 26/7, bare copper strands
• Connectors: RJ-45 — both ends
• Jacket: LSZH (low smoke zero halogen)
• Standards: ISO/IEC 11801, EN50288, TIA/EIA 568-C.2
• Colour: Black
• Weight: 20 g

How to use

Insert the RJ-45 connector into the corresponding ports on your network devices until it clicks. Use the 0.5 m LogiLink Cat.6A cable for short patching runs where minimal slack is desired. Avoid sharp bends and excessive tension on the cable during installation to maintain shielding integrity and signal quality. For rack installations, route the cable alongside other patch leads without compressing the jacket.

Recommendations

For best performance, use the cable within structured cabling systems that meet Cat.6A installation guidelines and keep cable lengths appropriate for the intended high-speed link. Avoid running the cable parallel to high-voltage power lines to minimize interference.