Καλώδιο δικτύου LogiLink 0,5 m Cat.6A RJ-45 S/FTP λευκό

LogiLink Cat.6A 10G S/FTP patch cable, 0.5 m, with RJ-45 connectors on both ends, provides high-speed data transmission for network devices. The cable uses AWG 26/7 bare copper conductors and PIMF (Pair in Metal Foil) construction with S/FTP shielding to reduce electromagnetic interference. The white LSZH (low smoke zero halogen) jacket and compliance with ISO/IEC 11801, EN50288 and TIA/EIA 568-C.2 standards make it suitable for professional structured cabling.

Advantages

The shielded S/FTP design and PIMF construction offer improved protection against crosstalk and external interference, supporting 10 Gbit/s transmission rates. AWG 26/7 bare copper conductors ensure reliable conductivity, while the LSZH jacket reduces toxic smoke in case of fire. Compact 0.5 m length minimizes cable clutter in patch panels and short interconnects.

Suitable for

• Short connections between switches, patch panels and servers
• High-speed 10 Gbit/s network segments
• Shielded cabling environments requiring reduced electromagnetic interference
• Data center top-of-rack and equipment interconnects

Key specifications

• Standard: Cat.6A (10G)
• Length: 0.5 m
• Connectors: RJ-45 to RJ-45
• Cable type: S/FTP (PIMF)
• Conductor: AWG 26/7 bare copper
• Jacket: LSZH (low smoke zero halogen)
• Weight: 20 g
• Colour: White
• Standards: ISO/IEC 11801, EN50288, TIA/EIA 568-C.2

How to use

Connect one RJ-45 plug to the network port of your device (switch, router, server or NIC) and the other plug to the corresponding port on the second device or patch panel. Ensure connectors are fully seated until the latch clicks. Use the 0.5 m length for short-distance links to avoid excess cable and maintain tidy cable management.

Recommendations

For optimal performance, use this Cat.6A S/FTP cable in shielded installations and pair it with properly grounded shielded connectors and patch panels. Avoid sharp bends (minimum bend radius per manufacturer guidance) and external mechanical stress; store and route the cable away from high-power electrical sources to minimize interference.