Καλώδιο δικτύου LogiLink 0,25 m RJ-45 Cat6 S/FTP κίτρινο

The LogiLink 0.25m RJ-45 Cat6 S/FTP yellow networking cable provides a short, shielded connection for high-speed data transmission between network devices. It features RJ-45 connectors on both ends, a 0.25 m cable length and a LSZH (low smoke zero halogen) jacket. The cable uses S/FTP (shielded overall with foil-wrapped pairs) construction with bare copper conductors and complies with industry standards including ISO/IEC 11801, EN50288 and TIA/EIA 568-B.2-1.

Advantages

The shielded S/FTP design reduces electromagnetic interference and crosstalk, improving signal integrity for short links. The LSZH jacket limits smoke and halogen emissions in case of fire, and the compact 0.25 m length helps tidy dense rack or patch panel installations. The bright yellow colour aids visual identification within cabling runs.

Suitable for

• Patching between adjacent switches or patch panels
• Connecting devices in rack-mounted or desktop setups where a short cable is required
• Short Ethernet links in offices, data centers and telecommunications closets

Key specifications

• Cable type: Cat6 S/FTP (PIMF) shielded twisted pair
• Connectors: RJ-45 to RJ-45
• Length: 0.25 m
• Conductor: bare copper
• Jacket: LSZH (low smoke zero halogen)
• Weight: 10 g
• Standards: ISO/IEC 11801, EN50288, TIA/EIA 568-B.2-1

How to use

Plug each RJ-45 connector into the corresponding Ethernet port on your devices, switches or patch panels until the latch clicks. Use the 0.25 m cable to create short, direct connections where excess cable length is undesirable; avoid sharp bends and excessive pulling force to preserve performance. Ensure connectors are fully seated and test the link with appropriate network testers after installation.

Recommendations

For optimal performance, use this Cat6 S/FTP cable for short patching runs and keep it away from strong sources of interference. Do not exceed bend radius recommendations and avoid installing under mechanical stress; verify link integrity after installation with a cable tester.