Καλώδιο δικτύου EFB Elektronik RJ45 S/FTP Cat6 25 m μαύρο

Networking Cable EFB Elektronik RJ45 S/FTP Cat6 25 m Black is a 1 Gigabit Ethernet Cat.6 patch cable designed for high-speed data transmission over distances up to 25 metres. The S/FTP construction (shielded foil around each pair plus braided overall shield) and RJ45 connectors with shielded plugs comply with IEC 60603-7-5 and TIA/EIA 568B coding to ensure robust signal integrity and reduced electromagnetic interference. The cable is LSZH, halogen-free and flame retardant according to IEC 60332-1, IEC 60754-2 and IEC 61034 standards.

Advantages

The S/FTP Cat6 design offers improved protection against crosstalk and external interference compared with unshielded cables, supporting Gigabit Ethernet (10/100/1000Base-T) and frequencies up to 250 MHz. The moulded strain relief boot with latch protection increases connector durability and reduces stress on the cable termination. Low-smoke, halogen-free jacket provides safer behaviour in case of fire and meets common safety standards.

Suitable for

• Wired LAN connections for offices and home networks
• Connecting switches, routers, patch panels and network devices
• Environments with potential electromagnetic interference
• Structured cabling installations requiring Cat6 performance over 25 m

Key specifications

• Cable type: S/FTP Cat.6 patch cable
• Length: 25 m
• Connectors: 2 x shielded RJ45 plugs (IEC 60603-7-5)
• Wiring: TIA/EIA 568B coded
• Conductor: 4 x 2 x AWG27/7, PiMF
• Diameter: Ø 6.2 mm
• Frequency: up to 250 MHz
• Standards: Flame retardant IEC 60332-1, halogen-free IEC 60754-2, low smoke IEC 61034
• Compatible with: 10/100/1000Base-T(X)
• Colour: Black

How to use

Plug each RJ45 connector into the corresponding network port on your devices (switch, router, PC or patch panel) ensuring the latch engages and the moulded boot protects the termination. Follow standard network wiring practices and TIA/EIA 568B pairing when terminating or verifying connections. Route the cable avoiding sharp bends and strong mechanical stress; maintain bend radii consistent with the cable diameter to preserve performance.

Recommendations

Use this Cat6 S/FTP cable in installations where shielding is required or where electromagnetic interference may affect signal quality. For permanent in-wall installations, verify local building codes and installation standards; consider using dedicated patch panels for structured cabling and avoid running the cable parallel to high-voltage power lines.