Καλώδιο δικτύου Digitus CAT 6 SF/UTP συνεστραμμένο Patch χύμα 100m γκρι

Network Cable Digitus CAT 6 SF/UTP twisted pair patch cord raw 100m Grey is a bulk Cat6 SF/UTP cable designed for assembly of RJ45 patch cords and for permanent installations up to Class E (250 MHz). Manufactured from copper conductors and meeting ANSI/TIA-568-C, ISO/IEC 11801 (2nd Ed.) and EN 50173-1 standards, the cable is PoE+ ready and intended for professional network cabling where reduced electromagnetic interference and compliance with international channel specifications are required.

Advantages

The cable supports Class E (250 MHz) performance and is manufactured and tested to ISO/IEC 11801 and DIN EN 50173 specifications. SF/UTP shielding reduces external interference while copper conductors ensure reliable signal transmission. The product is supplied in a 100 m bulk length for flexible on-site assembly of RJ45 connectors to create custom patch cords; connectors are not included.

Suitable for

• Assembly of custom RJ45 patch cords
• Structured cabling in offices and data rooms (Class E)
• Environments requiring PoE+ power delivery
• Installations where shielding is needed to minimise EMI

Key specifications

• Type: Cat6 SF/UTP twisted pair cable (raw patch cord cable)
• Length: 100 m
• Bandwidth: Class E, 250 MHz
• Conductor material: Copper (Cu)
• Standards: ANSI/TIA-568-C; ISO/IEC 11801 2nd Ed.; EN 50173-1; EN 50288-6-1
• PoE: PoE+ ready
• Colour: Grey
• Connectors: Not included (suitable for direct assembly of RJ45 connectors)

How to use

Measure and cut the required length from the 100 m bulk cable, strip the outer jacket and prepare the twisted pairs according to the chosen wiring standard (T568A or T568B). Fit compatible SF/UTP RJ45 connectors or use a shielded connector assembly method ensuring correct grounding of the foil drain. Test each assembled patch cord with a network cable tester to verify continuity, pair integrity and performance up to 250 MHz.

Recommendations

The cable should be installed following local building and cabling codes; ensure proper cable routing to avoid sharp bends and sources of interference. Use appropriate shielded connectors and grounding for SF/UTP to maintain shielding effectiveness. Perform certification testing after installation to confirm compliance with ISO/EN channel specifications.