Just Add Power πομπός HDMI-over-IP για τοποθέτηση σε rack 2G

Traditional HDMI cables limit signal distribution to short distances and fixed point-to-point connections. The Just Add Power VBS-HDMI-439A HDMI over IP Rackmount Transmitter solves this by converting HDMI signals into IP streams that travel over standard Gigabit Ethernet networks. This enables flexible, scalable AV distribution across buildings, campuses, or any network infrastructure, making it ideal for digital signage, video walls, and multi-room installations.

Who is it for

This transmitter is built for AV integrators, IT professionals, and system designers who need to distribute high-definition video and audio over long distances or to multiple displays. It is particularly suited for commercial environments such as sports bars, corporate offices, educational institutions, and retail spaces where reliable, low-latency video distribution is critical.

Main features

• Transmits HDMI video and audio over IP using visually lossless compression
• Supports resolutions up to 1920x1200 (WUXGA) and 1080p Full HD
• Ultra-low latency of less than one frame for real-time applications
• Half-width 1U rackmount design for efficient equipment room installation
• Integrated RS-232 and IR control for seamless device management
• HDCP 1.4 compliant for protected content playback
• Compatible with Just Add Power 2G+ receivers for scalable matrix and video wall setups

Specifications

• Video Input: 1x HDMI Type A
• Network Output: 1x RJ45 10/100/1000Base-T Ethernet
• Max Resolution: 1920x1200 (WUXGA) / 1080p Full HD
• Audio: Stereo 2-channel, Dolby Digital, DTS
• Control: 1x RS-232 (3-pin Phoenix), 1x IR Emitter, 1x IR Receiver
• Power: External 5V DC, 4A adapter (included)
• Power Consumption: 10W typical
• Latency: Less than 1 frame
• EDID Management: Yes
• Video Wall Capability: Yes (with compatible receivers)
• Chassis Material: Steel
• Operating Temperature: 0°C to 50°C (32°F to 122°F)
• Firmware Update: Via IP

Tips

For best performance, use a managed Gigabit switch with IGMP snooping to optimize multicast traffic. Ensure all connected devices support HDCP 1.4 if protected content will be displayed. When creating video walls, pair this transmitter with multiple Just Add Power receivers and use the built-in EDID management to maintain consistent resolutions across displays.