InLine S-76603U-1.22 καλώδιο δικτύου γκρι 1,22 m Cat6 S/FTP (S-STP)

The InLine S-76603U-1.22 is a 1.22 m Cat6 S/FTP twisted-pair network cable with RJ45 connectors on both ends, designed for reliable Gigabit Ethernet connections up to 1000 Mbit/s and supporting frequencies to 250 MHz. The cable has a grey PVC jacket and is intended for connecting switches, routers, sockets, patch panels and network cards in structured network installations.

Advantages

Shielded S/FTP construction provides overall braided shielding and foil-wrapped pairs (PiMF) to reduce electromagnetic interference. Solid copper AWG26 conductors ensure stable signal transmission. Molded RJ45 plugs with angled boots on each end facilitate secure connections and strain relief. The cable follows EIA/TIA 568B wiring for straightforward installation and is PoE-capable for powering compatible devices.

Suitable for

• Connecting switches, routers and network sockets
• Patching between patch panels and network devices
• Gigabit Ethernet (1000 Mbit/s) home or office networks
• Power over Ethernet (PoE) applications

Key specifications

• Length: 1.22 m
• Cable category: Cat6
• Shielding: S/FTP (overall braid + pairs in metal foil / PiMF)
• Conductor: solid copper, AWG26
• Connectors: RJ-45 angled male on both ends (latching lug on top)
• Wiring: 1:1 assignment according to EIA/TIA 568B
• Jacket material: PVC
• Speed: Gigabit Ethernet 1000 Mbit/s
• Frequency: up to 250 MHz
• Colour: Grey

How to use

Connect each RJ45 plug to the corresponding RJ45 ports on your network devices (switch, router, patch panel or network card). Ensure the angled boots match the orientation of your ports to avoid strain; the cable provides molded kink protection and strain relief. Verify link speed on your devices after installation and use EIA/TIA 568B wiring compatible hardware for consistent pairing.

Recommendations

For best performance, avoid tight bends and prolonged pressure on the cable; maintain bend radius recommended for Cat6 cables and keep the cable away from strong electromagnetic sources. Use for short interconnect runs within racks, desks or patch panels where a shielded Cat6 cable is required.