InLine καλώδιο επέκτασης DC, βύσμα/υποδοχή DC 3,5x1,35mm, AWG 18, λευκό 1m

The InLine DC extension cable is a 1 m white cable with 3.5 x 1.35 mm male and female DC connectors. It is designed to extend DC power connections for devices that use a 3.5 x 1.35 mm plug and supports typical low-voltage applications with a rated input voltage of 12 V and current up to 11.6 A. The AWG 18 conductor gauge provides reliable power transfer while the white finish offers a neutral appearance that blends with most setups.

Advantages

This extension cable provides a simple way to increase the reach of existing DC power leads without modifying the original adapter or device. The matched 3.5 x 1.35 mm male and female connectors ensure compatibility with devices and adapters using that standard size. With AWG 18 wiring and a rating for 11.6 A, the cable can handle moderate DC currents for small to medium electronics. The white jacket keeps the cable visually unobtrusive in light-coloured environments.

Suitable for

• Extending power connections for routers, CCTV cameras, LED drivers and similar devices using 3.5 x 1.35 mm DC plugs
• Replacing or extending short DC leads from adapters or equipment
• Temporary or permanent installations where a 1 m extension is sufficient

Key specifications

• Cable length: 1 m
• Connector 1: 3.5 x 1.35 mm (male)
• Connector 2: 3.5 x 1.35 mm (female)
• Rated input voltage: 12 V
• Rated current: 11.6 A
• Conductor gauge: AWG 18
• Product colour: White
• Brand: InLine, MPN: 26901H, EAN: 4043718309092

How to use

Connect the male 3.5 x 1.35 mm plug of the extension cable into the female DC socket of your power adapter or device, then plug the female end into the device requiring power. Ensure connectors are fully seated to maintain a secure electrical connection. Observe the cable routing to avoid sharp bends, pinching or placing the cable under heavy objects that could damage the jacket or conductors.

Recommendations

Verify that the device and adapter use a 3.5 x 1.35 mm DC connector and that the current draw does not exceed 11.6 A. For higher current requirements or longer runs, choose a cable with a larger conductor gauge or consult the device manufacturer.