InLine Καλώδιο δικτύου SF/UTP Cat.5e πράσινο 0,25 m

The InLine Patch Cable SF/UTP Cat.5e green 0.25m is a short twisted-pair network cable with RJ45 connectors on both ends. It conforms to Cat5e standards and features SF/UTP shielding to reduce electromagnetic interference, supporting Gigabit Ethernet connections up to 1 Gb/s and an operating frequency up to 125 MHz. The compact 0.25 m length is suitable for short patching runs in structured cabling or device-to-device connections.

Advantages

SF/UTP shielding provides improved protection against external interference compared to unshielded cables. Cat5e compliance ensures compatibility with common network equipment and supports Gigabit speeds. The 0.25 m length reduces excess cable clutter in patch panels or desktop setups, and RJ45 connectors allow straightforward plug-and-play installation.

Suitable for

• Connecting switches, routers and network outlets at short distances
• Patching between patch panels and wall sockets
• Device-to-device connections (e.g., PC to switch) in home or office environments

Key specifications

• Standard: Cat.5e
• Type: Twisted-pair SF/UTP (shielded foil around twisted pairs with overall braid)
• Length: 0.25 m
• Connectors: RJ45 on both ends
• Supported speed: up to 1 Gb/s (Gigabit Ethernet)
• Maximum frequency: 125 MHz
• Color: green

How to use

Plug the RJ45 connectors into the corresponding Ethernet ports of your devices (switch, router, network card or wall socket). Ensure connectors are fully inserted until the latch clicks. Use the cable for short patching runs where a 0.25 m length is sufficient; avoid sharp bends near the connectors to maintain signal integrity.

Recommendations

For best performance, route the cable away from strong sources of electromagnetic interference and avoid running it parallel to power cables. Verify that connected devices support Gigabit Ethernet if you require 1 Gb/s throughput.