Injector Gigabit Ethernet PoE+ Digitus 802.3at 30 W μαύρο

The Digitus Gigabit Ethernet PoE+ injector 802.3at 30 W Black provides network extension and power delivery where local power outlets are unavailable. It supports IEEE 802.3af/at standards and supplies up to 30 W while maintaining gigabit data throughput, making it suitable for PoE-capable devices such as access points, IP cameras and IP phones. The unit has a compact, durable plastic housing and offers plug-and-play installation for straightforward integration into existing networks.

Advantages

The injector delivers up to 30 W of power and supports 10/100/1000 Mbit/s gigabit Ethernet for high-speed data and power over a single cable. It is compatible with IEEE 802.3af/at devices, provides power and data transmission over distances up to 100 m, and includes short-circuit and overload protection to ensure safe operation. Automatic device detection optimises power output and the robust black plastic enclosure fits various installation environments.

Suitable for

• Powering Wi‑Fi access points (AP)
• Supplying IP surveillance cameras
• Connecting PoE IP telephones
• Extending network segments where mains power is not available

Key specifications

• Standard: IEEE 802.3af/at (PoE+)
• Maximum power output: 30 W
• Data rate: 10/100/1000 Mbit/s (Gigabit Ethernet)
• Ports: 2 x RJ‑45 Ethernet
• Maximum PoE cable distance: up to 100 m
• Dimensions (W × D × H): 142 × 60 × 32 mm
• Colour: Black
• Manufacturer: DIGITUS, MPN: DN-95103-3, EAN: 4016032500780

How to use

Connect the injector to a powered Ethernet source and to the PoE device using standard Cat5e/Cat6 cabling. The injector supplies power and transmits data automatically once connected; no configuration is required. Ensure cable runs do not exceed recommended distances and connect the correct RJ‑45 ports for data input and PoE output as indicated on the device.

Recommendations

For reliable operation, use quality Cat5e or Cat6 cables, maintain cable length below 100 m for PoE delivery, and install the injector in a dry, ventilated location. Verify device compatibility with IEEE 802.3af/at and ensure total power draw of connected devices does not exceed the 30 W output.