G.Skill | 8 GB | DDR4 | 2666 MHz | Φορητός | Registered No | ECC No

The G.Skill Ripjaws F4-2666C19S-8GRS is an 8GB DDR4 SO-DIMM memory module for laptops and small form factor PCs. With a clock speed of 2666 MHz, CAS latency CL19 and a 260-pin SO‑DIMM form factor, this module offers a straightforward upgrade to improve multitasking responsiveness and overall system performance while maintaining low power consumption at 1.2 V.

Advantages

Manufactured from specially screened components selected through G.SKILL’s binning process and tested for stability, this Ripjaws DDR4 SO‑DIMM provides a combination of reliable performance and compatibility with modern high-performance laptops and compact PCs. The module operates at low voltage to reduce power draw and heat, and includes Intel XMP 2.0 profiles for easy performance configuration. G.SKILL supplies a limited lifetime warranty and technical support.

Suitable for

• Upgrading a laptop to improve multitasking and application responsiveness
• Small form factor or NUC systems that accept 260‑pin DDR4 SO‑DIMM modules
• Gaming laptops that support DDR4 SO‑DIMM memory
• Office and home PCs requiring efficient, low‑voltage memory

Key specifications

• Capacity: 8 GB
• Memory type: DDR4
• Clock speed: 2666 MHz
• CAS latency: CL19
• Form factor: 260‑pin SO‑DIMM
• Voltage: 1.2 V
• MPN: F4-2666C19S-8GRS
• EAN: 4713294220837

How to use

Power off the laptop or small form factor PC and disconnect from mains power. Open the memory compartment or remove the bottom panel following the device manufacturer’s instructions. Release the existing SO‑DIMM (if present) by gently pulling aside the retention clips and remove it at an angle. Align the notch of the G.Skill Ripjaws SO‑DIMM with the socket, insert the module at an angle and press down until the clips engage. Reassemble the device and power it on. Enter BIOS/UEFI if you need to enable or select an XMP 2.0 profile for the intended frequency and timings.

Recommendations

The module is intended for systems that explicitly support DDR4 260‑pin SO‑DIMM memory. Verify motherboard or laptop compatibility and maximum supported memory per slot before installation. When using XMP profiles, ensure the system cooling and power settings are adequate for higher performance modes.