DDR3 8GB PC 1333 CL9 G.Skill KIT (2x4GB) 8GNS value retail

G.Skill DDR3 8GB 1333MHz memory kit (2x4GB) provides dual-channel DDR3 RAM with a total capacity of 8 GB, a clock speed of 1333 MHz and a 240-pin DIMM form factor. The kit operates at 1.5 V and uses CAS latency CL9 timings (9-9-9-24). Note: Intel 4 series chipsets do not support this specific specification.

Advantages

This memory kit offers a straightforward capacity upgrade for systems that accept DDR3-1333 modules, delivering dual-channel operation through two matched 4 GB DIMMs. The 240-pin DIMM format and standard 1.5 V operation ensure compatibility with many desktop motherboards that support DDR3. CL9 timing provides predictable latency characteristics for general computing tasks.

Suitable for

• Upgrading desktop PCs that support DDR3-1333 (240-pin DIMM)
• Systems requiring 8 GB total memory in a dual-channel configuration
• Everyday computing, office work and light multitasking

Key specifications

• Brand: G.SKILL
• Model / MPN: F3-1333C9D-8GNS
• Capacity: 8 GB (2 x 4 GB)
• Type: DDR3
• Speed: 1333 MHz (PC3-10600 / PC3-10666)
• Timings: CL9 (9-9-9-24-2N)
• Voltage: 1.5 V
• Form factor: 240-pin DIMM
• EAN: 4711148599627

How to use

Power off the PC and disconnect it from mains power. Open the computer case according to the manufacturer’s instructions. Locate two matching DDR3 DIMM slots supporting dual-channel operation and insert the modules firmly into the slots until the retention clips engage. Reassemble the case, reconnect power and boot the system. Verify that the BIOS/UEFI recognizes the full 8 GB and that the memory speed and timings are set according to the motherboard’s supported settings. If the motherboard does not support DDR3-1333 or specifically excludes Intel 4 series chipsets, do not install this kit.

Recommendations

Install this kit only in motherboards that explicitly support DDR3-1333 240-pin DIMMs and do not list incompatibility with Intel 4 series chipsets. Check the motherboard manual or vendor support pages for memory compatibility and BIOS updates prior to installation.