Fischer 568006 ούπα εκτόνωσης 30 mm Nylon 6 mm 100 τεμ.

Fischer 568006 is a nylon expansion anchor (6 mm × 30 mm) supplied in a pack of 100 pieces. Designed for use in solid and perforated building materials such as concrete, brick, autoclaved aerated concrete and masonry, this expansion anchor provides secure fixation for wood and chipboard screws as well as stud screws when installed in a 6 mm drill hole.

Advantages

The 4-way expansion transmits forces evenly into the base material and ensures high load capacity in both solid and perforated substrates. Special fixing wings hold the screw in place for pre-fixation, freeing both hands during installation and aiding overhead use. The expansion-free plug neck prevents surface expansion forces while screwing, reducing the risk of damage to tiles and plaster. The plug’s shaped body allows easy insertion into the drill hole with a few light hammer blows, and a pronounced collar prevents the anchor from slipping too far into the hole. A noticeable tightening torque signals correct installation and helps avoid overtightening. Made from high-quality nylon, the anchor provides long-term, reliable holding performance.

Suitable for

• Concrete and reinforced concrete
• Sand-lime brick and clay brick
• Autoclaved aerated concrete (AAC)
• Masonry and gypsum block
• Fixing fixtures with wood, chipboard or stud screws

Key specifications

• Brand: FISCHER
• MPN: 568006
• EAN: 4048962480825
• Type: Nylon expansion anchor (SX Plus style)
• Diameter: 6 mm
• Length: 30 mm
• Pack quantity: 100 pieces
• Suitable drill hole: 6 mm

How to use

Drill a 6 mm hole to the required depth in the substrate, clean the hole from dust, and insert the anchor until the collar rests against the surface. For pre-positioned installation, place the fixture and insert the screw; for push-through installation, insert the screw through the fixture into the anchor. As the screw is tightened, the anchor expands in four directions to secure itself in the base material. Use screws with a length equal to plug length + fixture thickness + screw diameter.

Recommendations

Use the Fischer 6 mm × 30 mm nylon expansion anchors in materials indicated by the manufacturer (concrete, brick, AAC, masonry). Clean drill holes before insertion and choose screw types compatible with the anchor (wood/chipboard/stud screws). For reliable performance, match screw length to plug length + fixture thickness + screw diameter and avoid overtightening.